SM-A125F U2 Dead Boot Repair Scatter unbrick Firmware [Tested Solution] [USB +Testpoint A12] UnlockTool [BIT2]By[www.testedfirmwares.com]

Rate this post

SM-A125F U2 Dead Boot Repair Scatter unbrick Firmware [Tested Solution] [USB +Testpoint A12] UnlockTool [BIT2]By[www.testedfirmwares.com]

 

 

SM-A125F U2 Dead Fix File,

SM-A125F U2 Dead Boot Repair Scatter Firmware,

SM-A125F U2 Dead Mod Fix Scatter File,

SM-A125FDead Recovery Solution Scatter Firmware,

SM-A125F U2 Black Dispay Fix Scatter Firmware,

SM-A125F U2 Only MTK Port Show Fix Firmware,

SM-A125F U2 Mtk Scattter Unlock tool Backup Firmware,

SM-A125F U2 Dead Solution Tested Firmware,

SM-A125F U2 Unbrick Scatter Firwmare,

SM-A125F U2 MTK Scatter Tested Firmware,


You have to wait 15 seconds.

Generating Download Link Wait..


Dead Boot Repair Scatter unbrick Firmware For A125F,

A125F TESTPOINT

#Launch and Proceed to the Mediatek Section and Select MTK Universal Find and Select Bootloader Unlock
   Option [PERM|| UNLOCK BL] Connect USB after Testpoint has been Connected After
   Bootloader Unlocked Success Stage One Completed Ξ

# Still Under the Mediatek Universal SectionSelect Scatter |Dump File Directory Loader and Locate the
   TestedFirmwares Unbrick Premium File Folder and Scatter MT6765 Scatter
   Avaliable in the Downladed Archive From this Page
   Allow Flashing to Complete it should take about 5/12 Minutes All Done.

# Power On Device and you will get a Bootloader Unlock Security Prompt Proced to Press the Power Switch
   [Bootloop Might Occur but Fear Not] Device will eventually bootinto recovery mode .Once in Recovery Mode
   Select Factory Data Reset and Voila device will Format and Reboot Successfully .All Process Done
   and Dead Restoration From Death Completed.

# Perfection Stage IV Under the Unlock Tool MTK Universal Select Relock Boot Loader[RELOCK BL]
   Connect Testpoint and USB and allow Relocking Bootloader to be done Successfully.

# Regret Stage V [You Should have Stopped at 3] on restart you will get a Partition Bootloader Error
   Prompted with emergency download mode background Screen to Fix this Proceed Carefully:

#Advance and Final Fix Stage V1 Select MEDIATEK option and
   Find / Select [Boot Device] [ it can be found very close to Reboot Option in UnlockTool]
   Connect Testpoint and insert USB for the last Time and
   Locate the vbmeta File (.img) and Flash Only this File .

 

#Flash Success Done Ok V11 Completion Stage Relock Device Done Unbrick and Restore Completed .

 

For More Tested Firmware Click Here

For Zip File Password Click Here

Leave a Comment

error: Alert: Content selection is disabled!!